
Looking to replace your roof in Boca Raton or South Florida? Upgrading to a metal roof is one of the smartest long-term investments a Florida homeowner can make. Asphalt shingles wear out fast in our climate — UV exposure, salt air, and hurricane-force winds can cut their lifespan in half. A properly installed metal roof, on the other hand, can last 40 to 70 years and dramatically improve your home's energy performance, insurance profile, and curb appeal.
We specialize in replacing shingle, tile, and aging metal roofs with high-quality standing seam and 5V crimp roofing systems engineered for South Florida's High-Velocity Hurricane Zone (HVHZ). Whether your roof is leaking, storm-damaged, or simply at the end of its life, our team manages the entire replacement process — from tear-off and structural inspection to permitting, installation, and final cleanup.
When Should You Replace Your Roof?
Most South Florida homeowners wait too long to replace their roof, often discovering the damage only after a leak appears inside the home. By that point, water has typically been traveling through decking, insulation, and drywall for months. Look for these warning signs:
- Your roof is over 15–25 years old (shingle) or 30+ years (tile)
- Active leaks, water stains, or mold on interior ceilings
- Cracked, missing, curling, or granule-bald shingles
- Cracked or slipped concrete tiles after a storm
- Sagging rooflines or soft spots in the decking
- Visible storm or hurricane damage
- Rising energy bills caused by a heat-absorbing roof
- Insurance carrier non-renewal due to roof age or condition
Replacing your roof proactively prevents far more expensive structural repairs and protects your insurance eligibility — a major issue across Palm Beach and Broward counties.
Benefits of Replacing Your Roof with Metal
When it's time to re-roof, metal is the highest-performing material available for Florida homes. Compared to a typical shingle or tile re-roof, metal delivers:
- 40–70 year lifespan — often the last roof you'll ever buy
- Hurricane resistance — wind ratings up to 180 mph
- Energy efficiency — reflective finishes can cut cooling costs 20–25%
- Lower long-term maintenance — no granule loss, cracking, or rot
- Insurance premium discounts for hurricane-rated systems
- Increased home value and stronger resale appeal
- Class A fire rating and excellent impact resistance
- Eco-friendly — fully recyclable at end of life
Learn more about why so many homeowners are switching in our guide to residential metal roofing in South Florida.
Replacing Shingle, Tile, or Flat Roofs with Metal
We replace virtually every type of residential roofing system with metal:
- Asphalt shingle to metal: The most common upgrade. We tear off the old shingles, inspect and repair decking, and install a new high-temp underlayment before the metal panels go on.
- Concrete or clay tile to metal: Tile roofs are heavy and prone to cracking. Replacing with standing seam dramatically reduces structural load while improving wind performance.
- Old metal to new metal: Aging exposed-fastener systems (5V crimp, R-panel) can be upgraded to modern concealed-fastener standing seam.
- Flat or low-slope roofs: We replace failed modified bitumen and TPO systems with appropriate low-slope metal or hybrid solutions.
Cost of Metal Roof Replacement in Boca Raton
The cost of a metal roof replacement in Boca Raton and Palm Beach County typically ranges from $14 to $24+ per square foot installed, depending on several factors:
- Roof size & complexity — pitch, valleys, hips, dormers, and skylights
- Panel system — standing seam costs more than 5V crimp but offers better long-term value
- Material gauge & finish — 24-gauge Galvalume or aluminum with Kynar 500 paint
- Tear-off scope — single-layer shingle vs. heavy concrete tile
- Decking repairs — rot or rusted fasteners discovered after tear-off
- Permits & inspections — required for HVHZ compliance
While metal carries a higher upfront cost than shingles, it pays back through lower energy bills, fewer repairs, insurance discounts, and a lifespan two to three times longer than asphalt. For a deeper breakdown, see our Boca Raton metal roofing pricing guide.
Our Metal Roof Replacement Process
Every replacement we perform follows a strict, code-compliant process to ensure your new roof passes inspection and performs for decades:
- On-site inspection & detailed estimate — measurements, panel selection, color samples
- Permitting — we pull all required Boca Raton / Palm Beach County HVHZ permits
- Full tear-off of existing roofing materials down to the deck
- Structural inspection of decking, fascia, and framing; rotted wood replaced
- Re-nailing of decking to current Florida Building Code uplift standards
- High-temp underlayment (Polystick XFR or equivalent) as a self-adhered secondary water barrier
- Drip edge, valleys, and flashings installed per manufacturer details
- Metal panel installation — standing seam, 5V crimp, or nailstrip
- Ridge, hip, and trim caps with closed-cell foam closures
- Final cleanup, magnetic nail sweep, and inspection
For a deeper look at the install side of the project, visit our metal roof installation page.
Why Metal Roof Replacement Is Ideal for Florida Homes
South Florida is one of the most punishing roofing environments in the country. Between hurricane season, year-round UV exposure, salt-laden coastal air, and torrential summer rains, lesser materials simply don't last. A properly engineered metal roof is built to handle all of it:
- Hurricane-force winds and wind-driven rain
- Extreme heat and constant UV degradation
- Heavy seasonal rainfall and standing-water risk
- Coastal salt corrosion (aluminum panels recommended near the ocean)
- Mold, mildew, and algae common to humid climates
Why Homeowners Choose Us for Roof Replacement
- Project-specific recommendations for the roof and local requirements
- Specialists in HVHZ code-compliant metal roofing
- Premium materials — 24-gauge steel, aluminum, Kynar 500 finishes
- Manufacturer-certified standing seam installers
- Clean, professional crews and protected job sites
- Transparent pricing with no surprise change orders
- Strong manufacturer and workmanship warranties
Metal Roofing Projects in South Florida
See finished standing-seam roofs, aerial project views, and crews installing panels on real homes.
Boca Raton & Palm Beach County Metal Roofing Guides
Use these local guides to compare contractors, codes, insurance, permitting, coastal exposure, and installation timing.
How to Choose the Best Metal Roofing Contractor in Boca Raton
License, insurance, NOA panels and 7 red flags to avoid.
Read guide CodeHurricane-Rated Metal Roofs: 2026 Palm Beach County Code Guide
170–180 mph wind zones and why standing seam wins.
Read guide InsuranceMetal Roof Insurance Discounts: What Boca Raton Homeowners Save
Wind mitigation credits worth $1,400–$5,000/year.
Read guide ProcessMetal Roof Permits & HOA Approval in Boca Raton and Delray Beach
Realistic 6–10 week paperwork map for South Florida.
Read guide CoastalCoastal Metal Roofing: Highland Beach, Manalapan & Ocean Ridge
Salt-air aluminum, PVDF finishes, stainless fasteners.
Read guide TimelineHow Long Does a Metal Roof Install Take in Palm Beach County?
Week-by-week from signed contract to final inspection.
Read guideAreas We Serve
We provide metal roof replacement throughout Palm Beach and Broward counties, including Boca Raton, Delray Beach, Boynton Beach, Deerfield Beach, Highland Beach, Lake Worth, Wellington, Royal Palm Beach, Greenacres, Palm Beach Gardens, Jupiter, and West Palm Beach.
Frequently Asked Questions
Is it worth replacing my roof with metal?
Yes. Metal roofs last two to three times longer than asphalt shingles, qualify for insurance discounts, and significantly reduce cooling costs in Florida's climate.
Can you install a metal roof over existing shingles?
In some jurisdictions yes, but in HVHZ areas like Palm Beach and Broward counties we strongly recommend a full tear-off. It's the only way to inspect the decking, install proper underlayment, and meet current Florida Building Code uplift standards.
How long does a metal roof replacement take?
Most residential replacements take 5–10 working days from tear-off to final inspection, depending on roof size, complexity, and weather.
Will a new metal roof lower my insurance premiums?
Often yes. Many Florida insurers offer wind mitigation credits for hurricane-rated metal roofing systems, especially when paired with a secondary water barrier and updated decking attachment.
Standing seam or 5V crimp for my replacement?
Standing seam offers concealed fasteners, better long-term performance, and a more modern look. 5V crimp is more affordable and great for traditional Florida architecture. We help you choose the right system for your home and budget.
Get a Free Metal Roof Replacement Estimate
Ready to replace your roof with a metal system that will outlast your mortgage? Contact us today for a free, no-obligation estimate. We proudly serve Boca Raton and all of South Florida with expert metal roof installation and standing seam roofing for homeowners who want the strongest, longest-lasting roof on the market.
What would this cost on your roof?
Price depends on the roof geometry, the panel you pick, and local permitting. Give us the address and we'll measure it and put real numbers on paper.
Loading the secure estimate form...





